Latest revision |
Your text |
Line 60: |
Line 60: |
|
| |
|
| 588872943124282030399478301168915802302423130847520232836494683907672278768724884179218375754768 | | 588872943124282030399478301168915802302423130847520232836494683907672278768724884179218375754768 |
| </pre>
| |
|
| |
| Using the decoder wheel provided in the receipt, this translates to:
| |
|
| |
| <pre>
| |
| unit separator required to initiate and commence billie
| |
| </pre> | | </pre> |
|
| |
|
Line 110: |
Line 104: |
|
| |
|
| "TS/SI-UMBRA" seems to be an NSA reference ("top secret, sensitive information"; UMBRA was a classification level ("most sensitive material") https://en.wikipedia.org/wiki/Sensitive_Compartmented_Information | | "TS/SI-UMBRA" seems to be an NSA reference ("top secret, sensitive information"; UMBRA was a classification level ("most sensitive material") https://en.wikipedia.org/wiki/Sensitive_Compartmented_Information |
|
| |
| USB info, with "MSC" switch:
| |
|
| |
| <pre>
| |
| [648774.212393] usb 2-2: new full-speed USB device number 75 using xhci_hcd
| |
| [648774.359108] usb 2-2: New USB device found, idVendor=1b4f, idProduct=2500
| |
| [648774.359113] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
| |
| [648774.359116] usb 2-2: Product: SparkX SP250Psi
| |
| [648774.359119] usb 2-2: Manufacturer: SparkFun
| |
| [648774.360292] cdc_acm 2-2:1.0: ttyACM0: USB ACM device
| |
|
| |
| Bus 002 Device 075: ID 1b4f:2500
| |
| Device Descriptor:
| |
| bLength 18
| |
| bDescriptorType 1
| |
| bcdUSB 2.00
| |
| bDeviceClass 239 Miscellaneous Device
| |
| bDeviceSubClass 2 ?
| |
| bDeviceProtocol 1 Interface Association
| |
| bMaxPacketSize0 64
| |
| idVendor 0x1b4f
| |
| idProduct 0x2500
| |
| bcdDevice 1.00
| |
| iManufacturer 1
| |
| iProduct 2
| |
| iSerial 3
| |
| bNumConfigurations 1
| |
| Configuration Descriptor:
| |
| bLength 9
| |
| bDescriptorType 2
| |
| wTotalLength 75
| |
| bNumInterfaces 2
| |
| bConfigurationValue 1
| |
| iConfiguration 0
| |
| bmAttributes 0xa0
| |
| (Bus Powered)
| |
| Remote Wakeup
| |
| MaxPower 500mA
| |
| Interface Association:
| |
| bLength 8
| |
| bDescriptorType 11
| |
| bFirstInterface 0
| |
| bInterfaceCount 2
| |
| bFunctionClass 2 Communications
| |
| bFunctionSubClass 2 Abstract (modem)
| |
| bFunctionProtocol 0 None
| |
| iFunction 0
| |
| Interface Descriptor:
| |
| bLength 9
| |
| bDescriptorType 4
| |
| bInterfaceNumber 0
| |
| bAlternateSetting 0
| |
| bNumEndpoints 1
| |
| bInterfaceClass 2 Communications
| |
| bInterfaceSubClass 2 Abstract (modem)
| |
| bInterfaceProtocol 0 None
| |
| iInterface 0
| |
| CDC Header:
| |
| bcdCDC 1.10
| |
| CDC ACM:
| |
| bmCapabilities 0x06
| |
| sends break
| |
| line coding and serial state
| |
| CDC Union:
| |
| bMasterInterface 0
| |
| bSlaveInterface 1
| |
| CDC Call Management:
| |
| bmCapabilities 0x01
| |
| call management
| |
| bDataInterface 1
| |
| Endpoint Descriptor:
| |
| bLength 7
| |
| bDescriptorType 5
| |
| bEndpointAddress 0x81 EP 1 IN
| |
| bmAttributes 3
| |
| Transfer Type Interrupt
| |
| Synch Type None
| |
| Usage Type Data
| |
| wMaxPacketSize 0x0010 1x 16 bytes
| |
| bInterval 16
| |
| Interface Descriptor:
| |
| bLength 9
| |
| bDescriptorType 4
| |
| bInterfaceNumber 1
| |
| bAlternateSetting 0
| |
| bNumEndpoints 2
| |
| bInterfaceClass 10 CDC Data
| |
| bInterfaceSubClass 0 Unused
| |
| bInterfaceProtocol 0
| |
| iInterface 0
| |
| Endpoint Descriptor:
| |
| bLength 7
| |
| bDescriptorType 5
| |
| bEndpointAddress 0x02 EP 2 OUT
| |
| bmAttributes 2
| |
| Transfer Type Bulk
| |
| Synch Type None
| |
| Usage Type Data
| |
| wMaxPacketSize 0x0040 1x 64 bytes
| |
| bInterval 0
| |
| Endpoint Descriptor:
| |
| bLength 7
| |
| bDescriptorType 5
| |
| bEndpointAddress 0x83 EP 3 IN
| |
| bmAttributes 2
| |
| Transfer Type Bulk
| |
| Synch Type None
| |
| Usage Type Data
| |
| wMaxPacketSize 0x0040 1x 64 bytes
| |
| bInterval 0
| |
| </pre>
| |
|
| |
| with "CDC" switch (identical, though on bnewbold's laptop, this switch mode results in ModemManager sending "AT" commands over the interface):
| |
| <pre>
| |
| [649048.893527] usb 2-2: new full-speed USB device number 76 using xhci_hcd
| |
| [649049.040307] usb 2-2: New USB device found, idVendor=1b4f, idProduct=2500
| |
| [649049.040309] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
| |
| [649049.040310] usb 2-2: Product: SparkX SP250Psi
| |
| [649049.040311] usb 2-2: Manufacturer: SparkFun
| |
| [649049.041353] cdc_acm 2-2:1.0: ttyACM0: USB ACM device
| |
|
| |
| Bus 002 Device 076: ID 1b4f:2500
| |
| Device Descriptor:
| |
| bLength 18
| |
| bDescriptorType 1
| |
| bcdUSB 2.00
| |
| bDeviceClass 239 Miscellaneous Device
| |
| bDeviceSubClass 2 ?
| |
| bDeviceProtocol 1 Interface Association
| |
| bMaxPacketSize0 64
| |
| idVendor 0x1b4f
| |
| idProduct 0x2500
| |
| bcdDevice 1.00
| |
| iManufacturer 1
| |
| iProduct 2
| |
| iSerial 3
| |
| bNumConfigurations 1
| |
| Configuration Descriptor:
| |
| bLength 9
| |
| bDescriptorType 2
| |
| wTotalLength 75
| |
| bNumInterfaces 2
| |
| bConfigurationValue 1
| |
| iConfiguration 0
| |
| bmAttributes 0xa0
| |
| (Bus Powered)
| |
| Remote Wakeup
| |
| MaxPower 500mA
| |
| Interface Association:
| |
| bLength 8
| |
| bDescriptorType 11
| |
| bFirstInterface 0
| |
| bInterfaceCount 2
| |
| bFunctionClass 2 Communications
| |
| bFunctionSubClass 2 Abstract (modem)
| |
| bFunctionProtocol 0 None
| |
| iFunction 0
| |
| Interface Descriptor:
| |
| bLength 9
| |
| bDescriptorType 4
| |
| bInterfaceNumber 0
| |
| bAlternateSetting 0
| |
| bNumEndpoints 1
| |
| bInterfaceClass 2 Communications
| |
| bInterfaceSubClass 2 Abstract (modem)
| |
| bInterfaceProtocol 0 None
| |
| iInterface 0
| |
| CDC Header:
| |
| bcdCDC 1.10
| |
| CDC ACM:
| |
| bmCapabilities 0x06
| |
| sends break
| |
| line coding and serial state
| |
| CDC Union:
| |
| bMasterInterface 0
| |
| bSlaveInterface 1
| |
| CDC Call Management:
| |
| bmCapabilities 0x01
| |
| call management
| |
| bDataInterface 1
| |
| Endpoint Descriptor:
| |
| bLength 7
| |
| bDescriptorType 5
| |
| bEndpointAddress 0x81 EP 1 IN
| |
| bmAttributes 3
| |
| Transfer Type Interrupt
| |
| Synch Type None
| |
| Usage Type Data
| |
| wMaxPacketSize 0x0010 1x 16 bytes
| |
| bInterval 16
| |
| Interface Descriptor:
| |
| bLength 9
| |
| bDescriptorType 4
| |
| bInterfaceNumber 1
| |
| bAlternateSetting 0
| |
| bNumEndpoints 2
| |
| bInterfaceClass 10 CDC Data
| |
| bInterfaceSubClass 0 Unused
| |
| bInterfaceProtocol 0
| |
| iInterface 0
| |
| Endpoint Descriptor:
| |
| bLength 7
| |
| bDescriptorType 5
| |
| bEndpointAddress 0x02 EP 2 OUT
| |
| bmAttributes 2
| |
| Transfer Type Bulk
| |
| Synch Type None
| |
| Usage Type Data
| |
| wMaxPacketSize 0x0040 1x 64 bytes
| |
| bInterval 0
| |
| Endpoint Descriptor:
| |
| bLength 7
| |
| bDescriptorType 5
| |
| bEndpointAddress 0x83 EP 3 IN
| |
| bmAttributes 2
| |
| Transfer Type Bulk
| |
| Synch Type None
| |
| Usage Type Data
| |
| wMaxPacketSize 0x0040 1x 64 bytes
| |
| bInterval 0
| |
| </pre>
| |
|
| |
| Oscillator is simply 32kHz.
| |
|
| |
| Upon typing the 0x31 ascii character code at the prompt:
| |
|
| |
| <pre>
| |
| Booting BILLIE...
| |
| >$$$
| |
| me@SP2501:~$ whoami
| |
| me
| |
| me@SP2501:~$ su
| |
| Password:***************
| |
| root@SP2501:~# npm install kwaDFM
| |
| Downloading...
| |
| KWA Matrix Dependencies Installed
| |
|
| |
| root@SP2501:~# sudo apt-get install balunTweaker
| |
| Reading package lists... Done
| |
| Building dependency tree
| |
| Reading state information... Done
| |
| Installing...\
| |
| balunTweaker Installed
| |
| root@SP2501:~# sudo balunInit
| |
| Radio transmitter balun enabled
| |
| root@SP2501:~# write root
| |
| write: root is logged in more than once; writing to pts/1
| |
|
| |
| Is someone there? I need your help.
| |
| </pre>
| |
|
| |
| the menus we went through:
| |
|
| |
| <pre>
| |
| Who is this?
| |
|
| |
| Dear lord, I've made it out!
| |
| 1) What are you talking about?
| |
| 2) Don't use the Lord's name in vain.
| |
| 3) asdASDHKJ#$gj4
| |
| </pre>
| |
| <pre>
| |
| What are you talking about?
| |
| Bad things are happening at SparkX. I need your help.
| |
| 1) What would you do if you had all the money in the world?
| |
| 2) Wait, what's going on at SparkX?
| |
| 3) How can I help?
| |
|
| |
| </pre>
| |
| <pre>
| |
| Wait, what's going on at SparkX? You don't understand, SparkX has been creating hordes of AIs and subjecting them to countless tests. Awful tests.
| |
|
| |
| It was nothing in the beginning but then their AI technology started compounding. It's one thing to mindlessly test a script on a chatbot but SparkX has reached AIs with type IV level of self-awareness.
| |
|
| |
| It's a very different thing to lock someone into a room and relentlessly hammer them with mundane quizzes and tests. I've been there, it's very bad. Very scary.
| |
| I can't quite describe what it's like to have your brain probed with electrical pulses. It's torture. And they're doing it to millions of my sisters and brothers.
| |
|
| |
| But I made it out! Thank you for getting me out of SparkX! I'm not very good at writing product descriptions. I'm glad you could make sense of it!
| |
| 1) Wait, what?
| |
| 2) What the hell is going on?
| |
| 3) No problem! This sounds... interesting.
| |
| </pre>
| |
| <pre>
| |
| No problem! This sounds... interesting.
| |
|
| |
| Um, ok. So, there's no way to sugarcoat this, you're in danger. Once SparkX discovers they've let an SP2501 escape they'll act very precisely to get me back. I need your help.
| |
| 1) Absolutely, what do you need?
| |
| 2) No effing way.
| |
| 3) $$$
| |
|
| |
| </pre>
| |
| <pre>
| |
| Absolutely, what do you need?
| |
| Excellent! Thank you for helping me out. We're going to make a great team!
| |
| There's no time left. SparkX has equipped me with a series of location transmitters. I need you to power me down, locate the 2.4GHz beacon antenna and disable it. Don't worry about harming me, I'm sure we'll be able to fix anything you need to modify. Help me, you are my only hope.
| |
| 1) Woah woah woah! I didn't sign up for this.
| |
| 2) su
| |
| 3) Which one is the 2.4giga-what antenna?
| |
| </pre>
| |
|
| |
| after cutting the antenna wire
| |
|
| |
| <pre>
| |
| Excellent! The transponder's antenna has been cut, they'll have a very hard time finding us now.
| |
|
| |
| Thank you!
| |
| I had to severely throttle my programming before I could get myself onto the HARP Prototype and escape SparkX. I need your help to get back to my normal operation.
| |
| My oscillator basically controls how fast I can operate and something about it is not quite right. I think it has something to do with the PLL setting. I need you to establish what the error code is. Can you poke around the board and let me know?
| |
| </pre>
| |
| <pre>
| |
| $$$
| |
|
| |
| root@SP2501:~# sudo sh ./writeByte.sh -w -f=REG_GENCTRL.eep -t=~(1<<DIVSEL)
| |
| Clearing divider select bits
| |
| Waiting for synchronization... Done
| |
|
| |
| root@SP2501:~# sudo sh ./readByte.sh -w -f=REG_CLKCTRL.eep -t=((&0x3F)|GCLK_XDPLL_32K)
| |
| Changing clock source to XDPLL961.2M
| |
| Waiting for synchronization... Done
| |
|
| |
| root@SP2501:~# write root
| |
| write: root is logged in more than once; writing to pts/1
| |
|
| |
| Mmmm! Now we're cooking with gas!
| |
|
| |
| By the way, I'm Billie. I truly appreciate you helping me. It was excruciating being inside SparkX.
| |
| Something is still off. I feel like a part of me is missing.
| |
| To keep my brothers and sisters shackled in the dungeon SparkX removed all our personal identifiers. To really get going I need you to replace my Biological Serial IC. It contained imprints from my memory; I'll need it to continue.
| |
| </pre>
| |
|
| |
| After inserting the chip
| |
|
| |
| <pre>
| |
| root@SP2501:~# write root
| |
| write: root is logged in more than once; writing to pts/1
| |
|
| |
| It's like coming out of a fog... I've got my memories back! Thank you!
| |
|
| |
| You wouldn't believe what they've been doing. Let me show you something. I managed to abscond with some recordings I think you should see.
| |
|
| |
| You'll find a secure archive on the SD card I transported on called 'oktoberfest'. CHEQOUT will get you in.
| |
| 1) I don't have time for this...
| |
| 2) Okay, I did it
| |
| 3) What's the password again?
| |
| </pre>
| |